Log Home Blueprints and other Information
Log Home Blueprints
Each of the standard models located on our website includes 3 sets of
log home blueprints/plans. The blueprints include foundation detail, rafter layouts, and
elevations. Blueprints of standard models or modified standard plans may
be purchased in advance of an order and deducted from the price when an
order is placed. Custom designs are welcomed and are blueprinted at no
additional cost to the customer.
Insurance
According to insurance industry officials, log homes are no more
expensive to insure than traditionally constructed homes. The key to
insurance rates; however, has more to do with a homes location than the
type of building material used. In fact, some insurance companies
recognize that the solid wood construction of a log home has greater
resistance to flame spread than the stud wall construction of a
traditional home. It has been discovered that log walls form a natural
firebreak because there are no channels to facilitate the spread of
fire.
Log Home Foundation
Our homes are designed to adapt to any kind of conventional foundation.
They are built over full basements, crawl spaces, concrete slabs, and
over pylons.
Log Home Insulation
Log homes are extremely energy efficient due to the large amount of wood
used in their construction. Wood has been proven to be one of the best
naturally occurring insulators known to man. In each square inch of wood
there are thousands of tiny air pockets trapped in its cellular
structure. These tiny pockets of air slow the transfer of heat through
the log keeping your home cozy in the winter and cool in the summer.
Transportation
Transportation can be arranged to anywhere in the United States. Freight
is calculated per loaded mile from our milling facility in South
Pittsburgh, Tennessee. All homes that exceed 1000 square feet may
require 2 truckloads to deliver. Delivery can usually be arranged within
60 days from the date of order.
Preservation & Maintenance of Logs
It is important to keep your logs dry. During the design and
construction of your home, be sure to allow adequate overhangs,
guttering, spouting and drainage provisions. After construction, treat
the exterior of your home with a good quality wood preservative. We
recommend repeating this process every three to five years. This is a
simple and inexpensive procedure using either a garden sprayer or brush
to apply the preservative. The interior of your home can be finished
with any good interior wood finish. Use a product that allows the wood
to breathe. Preservatives for the interior of the log walls are not
needed or recommended by Battle Creek Log Homes. If applied on the
inside of your home, preservation chemicals may continuously release
toxic fumes in your living environment. It is a much safer practice to
treat the outside of your home with a preservative application once your
home is complete.
Wiring & Plumbing
Wiring for electricity is not as difficult as it may seem. Most of your
electrical outlets and wall switches will be located on the interior
portion walls; however, locating electrical outlets on log walls is as
simple as planning them prior to construction. The first course of logs
is pre-drilled and conduit is run to the outlet. The opening for the
outlet box is easily routed to the second course of logs. To install a
wall switch on a log wall, simply vertically drill each course of logs
for the wire up to the switch box, or you can route the wire behind the
door jam and drill one log horizontally to the switch opening. The
plumbing is simply run through closets or interior partition walls, and
the duct work is run through the first floor partitions and vented
through the ceiling into the second floor.
Double Tongue & Groove
The double tongue & groove system has been proven to add strength,
rigidity, and air flow prevention to a log system. At Battle Creek Log
Homes, we are a firm believer in the double tongue & groove system and
have incorporated it on almost all of our log systems. Each tongue and
groove is additionally fortified with a weatherproof gasket to further
insure a complete airtight seal. The logs are then screwed and anchored
together with an olylog lag screw. This combination of tongue & groove,
gaskets, and lag screws provides for some of the best log structures on
the market today.
Hand Hewing
Battle Creek Log Homes is one of the few companies to still offer the
option of authentic hand hewing. We employ some of the best craftsmen in
the industry highly skilled in the arts of hewing. These craftsmen are
able to produce a highly crafted hand hewed exterior to our square logs.
Homeowners searching for that rustic Appalachian log home appeal, choose
the Battle Creek hand hewn square log for their new home.
V-Groove
The V-groove gets its name from its distinct shape. Each log is beveled
on its corner to make a V shape groove when it is stacked on another
log. The V-groove is very popular with homeowners who are searching for
a more finished texture on the inside of their home. The V-groove comes
on our D-log and is an option on the square log.
Chink Joint
Chinking of logs has been part of the log home since its origin, early
pioneers chinked between their logs with clay and straw in order to seal
out the harsh environment. Today, the chinking of logs is only done for
the rustic appearance it adds to the square log. The chink joint is
routed into the finished log and measure ½" deep and 1 ¾" wide. The
chink joint is optional on either side of the square log.
This site uses frames. If you are seeing this page, please update
your browser. Please use one of these browsers:
Internet Explorer or
Mozilla.
|